1940 NEW BODY PANELS

Complete Door
Just like the original with all the inner braces and holes to mount the door latches and window regulators. Shipped by truck freight. Customer pays trucking company at time of delivery for shipping costs.

Door Hinges
Includes upper and lower door hinges and mounting hardware. Also includes instructions.

Floor Pan
Available in sections. Shipped by truck freight. Customer pays trucking company at time of delivery for shipping costs.

Quarter Panel
Full quarter from the back of the door to the trunk. Includes the B pillar reinforcement, quarter window, wheel well, and the runk seal lip. Shipped by truck freight. Customer pays trucking company at time of delivery for shipping costs.

FLOOR PANS

Front Sloping Floor Section or Toe Boards
Connects the flat section of the floor pan to the firewall.

Front Floor Pan

Rear Floor Pan

Pickup Floor Pans

Front Door Hinge Post to Floor Brace

Floor Pan Braces

Under Body Floor Braces
These are the outer part of the brace. Made from 18 gauge steel.

TRANSMISSION HOLE COVER

Transmission Hole Cover

Transmission Hole Cover Screws

COWL PATCHES

Cowl Side Panels
Inner & outer cowl structure replaces up to the belt line. Pre-drilled holes for hood hinge, cowl trim, hood support, hood bumper, & door hinges. Fender cage nuts installed.

Cowl Patch Panel

Lower Inner Cowl Structure

DOOR

Door Bottom Patch Panel
Kit includes outer door skin and inner door structure. Outer door skin is stamped from 20 gauge steel and is 6 inches high. The inner door structure is stamped from 18 gauge steel.

Outer Door Bottom Patch Panel

ROCKER PANELS

Outer Rocker Patch Panel

Front Rocker Box Assembly

Center Rocker Box Assembly

Rear Rocker Box Assembly

Inner Rocker Patch Panel
Replacement type, no ribs.

QUARTER PANELS

Front Lower Quarter Patch Panel

Rear Section Quarter Patch Panel

Inner Quarter Patch Panel

Body to Frame Gusset

TRUNK

Replacement Type Trunk Floor
Not correct for a restoration, but excellent for a street rod or driver car. Made from 18 gauge steel. 1941-Early 46 Used with cars that have a tool compartment at the back of the trunk, Late 1946-48 is for a flat trunk floor without a tool compartment.

Trunk Floor Main Section
These do not include cut out for spare tire well. Die formed 18 gauge.

Trunk Floor Rear Section
Die stamped 18 gauge. Mounts at rear of body, goes forward 8".

Trunk Spare Tire Well
Not made like original. Holds tire straight , not at an angle like original.

UNDER TRUNK LID

Under Trunk Lid Panel

Tool Tray

Tool Tray to Under Trunk Panel Braces

GAS TANK COVER

Steel Gas Tank Cover -Smooth No Holes
Has mounting holes. The filler neck hole is marked, must be cut open to use original gas tank.

Gas Tank Cover Screws

MISC

Weld in Hole Repair KIt
Made of 18 gauge 3/64" thick steel. 200 Piece kit. Includes 25 of each size: 1-1/4", 1", 7/8", 3/4", 5/8", 1/2", 3/8", 5/16"

Drip Rails
Must be welded to car.

35-47 PU CAB PATCH PANELS

Cowl Patch Panel

Floor Pans

Transmission Hole Cover

48-52 PU CAB PATCH PANELS

Cowl Patch Panel

Rocker Patch Panel

Floor Pan

Transmission Hole Cover

Lower Door Seal Retainer

Cab Corner Patch Panel

53-56 PU CAB PATCH PANELS

Cowl Patch Panel

Extended Cowl Patch Panel

Door Pillar Replacement

Front Body Mount

Upper Cab Mount Cup
Goes on top of large cab rubber mount.

Rubber Mount Metal Cup
Goes under large cab rubber mount.

Rocker Patch Panel

Cab Skirt Channel
Goes from cab to running board seal

Floor Pan

Steel Door
Steel door shell. Must be shipped via truck freight.

Inner Door Lower Patch Panel

Lower Outer Door Skin

Lower Door Seal Retainer on Door

Cab Corner Patch Panel

Rear Inner Cab Corner